Custom Extrusion Line Components · PLEXTRUD

Custom Components for
Plastic Extrusion Lines

Extrusion dies, extruder units, cooling water tanks, and haul-off units for new equipment, component replacement, and line upgrades. Configurations are reviewed against your material, product dimensions, output requirements, and existing equipment interfaces.

Send Inquiry Explore Components
Extrusion Dies Extruder Units Cooling Water Tanks Haul-Off Units OEM / Custom Config
Component Categories

Extruders, Dies, Cooling Tanks
& Haul-Off Units

Choose the component you need below. For replacements and upgrades, share equipment photos, drawings, and interface dimensions so compatibility can be reviewed before a quotation is confirmed.

Extrusion die tooling for plastic extrusion
01

Extrusion Dies

Die heads for straw and tube extrusion, with bore geometry, flow channels, and connection interfaces reviewed for your resin and product dimensions. Single-layer or multi-layer options are confirmed for the application.

Single / Multi-Layer Custom OD/ID Resin-Specific Tooling

For a quote: Resin, product cross-section, OD/ID, wall thickness, layer structure, and die connection drawing.

Request Extrusion Dies Quote
Single-screw extruder unit with hopper and control panel
02

Extruder Units

Single-screw extrusion units for new equipment and line upgrades. Screw diameter, motor power, heating zones, and output requirements are reviewed together with your material and downstream equipment.

Single Screw Custom Screw Diameter Matched Output Rate

For a quote: Resin, target output, screw requirements, local voltage, and upstream/downstream equipment details.

Request Extruder Units Quote
Stainless-steel cooling tank and water connections
03

Cooling Water Tanks

Cooling and sizing tanks matched to your extruded product and line speed. Tank length, cooling method, water connections, and centre height are confirmed for the installation.

Cooling Method Options Custom Length Stable Dimension Control

For a quote: Product dimensions, line speed, cooling method, available length, and water connection details.

Request Cooling Water Tanks Quote
Belt haul-off unit with adjustable pulling assembly
04

Haul-Off Units

Belt or caterpillar haul-off units for controlled pulling of extruded products. Contact width, speed range, clamping requirements, and centre height are selected for your product and line.

Caterpillar / Belt Variable Speed Drive Adjustable Grip Force

For a quote: Product dimensions, surface requirements, pulling speed, grip requirements, and line centre height.

Request Haul-Off Units Quote
Request Component Quote
Selection & Compatibility

Component Selection
& Compatibility Review

For a new installation, replacement, or upgrade, confirm both the product requirements and the equipment interfaces. Final compatibility is reviewed before production.

Information to Confirm

Application & Material

Finished product, resin grade, and relevant processing requirements

Product Dimensions

Cross-section drawing, outer/inner diameter, wall thickness, and tolerances

Existing Equipment

Manufacturer, model, serial plate, and photos of the current installation

Mechanical Interfaces

Connection drawings, flange dimensions, mounting points, and line centre height

Output & Line Speed

Target capacity and operating speed, matched to upstream and downstream equipment

Electrical & Controls

Voltage, frequency, phase, motor requirements, and control interfaces where applicable

Installation Space & Utilities

Available footprint, access, water supply/return, and other required services

Requirements by Component

Extrusion Dies

Product cross-section, resin, layer structure, and die-to-extruder connection

Extruder Units

Material, target output, screw requirements, and downstream compatibility

Cooling Water Tanks

Cooling method, tank length, centre height, and water connections

Haul-Off Units

Product contact area, speed range, grip requirements, and centre height

Drawings & Installation Photos

Attach a drawing or clear photos showing the existing component, connection points, and machine nameplate. If drawings are unavailable, share key measurements for an initial review. Any additional information needed for final confirmation will be identified.

Discuss Compatibility
Production & Pre-Shipment Confirmation

From Approved Specifications
to Confirmed Delivery

The production route, inspection scope, and acceptance criteria are confirmed for the component ordered. Dimensional, assembly, and functional checks are applied where relevant.

Specification & Interface Confirmation

Review drawings, materials, product dimensions, and installation interfaces. Confirm the configuration, inspection requirements, and acceptance criteria before production.

Drawings · Dimensions · Interfaces · Acceptance Criteria

Production & Assembly

Manufacturing, surface treatment, and assembly follow the approved component specifications. Treatment methods and assembly requirements depend on the part and application.

Machining · Applicable Treatment · Assembly

Component-Specific Inspection

Check die dimensions and connections, extruder assembly and applicable operation, tank dimensions and water circuits, or haul-off grip and speed as relevant. Trial conditions and inspection records are agreed for the order.

Dimensional Checks · Fit · Applicable Functional Tests

Confirmation, Packing & Delivery

Provide the agreed inspection information, photos, or trial results for review before dispatch. Confirm protective packing, shipping arrangements, and delivery documentation for the destination.

Review · Protective Packing · Shipping Documents

Discuss Inspection Requirements
After-Sales Support

Component Installation Guidance &
Spare Parts Support

Installation guidance, operating support, and replacement parts are available according to the component and project requirements. Service scope, on-site arrangements, and any related charges are confirmed with your quotation.

Installation Guidance

Installation and connection guidance for the supplied component. Relevant drawings and remote commissioning support are confirmed for your order.

Operation & Maintenance

Operating, parameter-setting, and maintenance guidance appropriate to the component, with operator training arranged where required.

Technical Support

Remote assistance for installation questions, fault diagnosis, and operating adjustments. Photos, equipment details, and fault information help identify the issue.

Spare Parts Supply

Replacement screws, barrels, die parts, seals, belts, and other wear parts can be requested. Part specifications and compatibility are confirmed before supply.

Get in Touch

Request an Extrusion
Line Component Quote

Select the component below and share your existing equipment model, product requirements, and key interface dimensions. Attach drawings or photos for a more useful compatibility review and quotation.

Details for Your Quote

  1. Which component do you need, and is this a new installation, replacement, or upgrade?

  2. Share the existing machine model, nameplate, and clear photos of the connection points.

  3. Provide the material, product dimensions, target output, and relevant electrical requirements.

  4. Attach a drawing or key measurements. We will identify any details needed to confirm compatibility.

plextrud@foxmail.com
Shenzhen, Guangdong, China
Component(s) of Interest

Accepted: PDF, Word, Excel, JPG, PNG, DWG, DXF, ZIP · Max file size: 100 MB

* Name and Email are required fields.

© 2026 PLEXTRUD · Shenzhen, Guangdong, China · All rights reserved.

Contact: plextrud@foxmail.com