Custom Components for
Plastic Extrusion Lines
Extrusion dies, extruder units, cooling water tanks, and haul-off units for new equipment, component replacement, and line upgrades. Configurations are reviewed against your material, product dimensions, output requirements, and existing equipment interfaces.
Extruders, Dies, Cooling Tanks
& Haul-Off Units
Choose the component you need below. For replacements and upgrades, share equipment photos, drawings, and interface dimensions so compatibility can be reviewed before a quotation is confirmed.
Khuôn Đùn
Die heads for straw and tube extrusion, with bore geometry, flow channels, and connection interfaces reviewed for your resin and product dimensions. Single-layer or multi-layer options are confirmed for the application.
For a quote: Resin, product cross-section, OD/ID, wall thickness, layer structure, and die connection drawing.
Request Extrusion Dies Quote
Bộ phận Máy Đùn
Single-screw extrusion units for new equipment and line upgrades. Screw diameter, motor power, heating zones, and output requirements are reviewed together with your material and downstream equipment.
For a quote: Resin, target output, screw requirements, local voltage, and upstream/downstream equipment details.
Request Extruder Units Quote
Bồn Nước Làm Mát
Cooling and sizing tanks matched to your extruded product and line speed. Tank length, cooling method, water connections, and centre height are confirmed for the installation.
For a quote: Product dimensions, line speed, cooling method, available length, and water connection details.
Request Cooling Water Tanks Quote
Bộ phận Kéo
Belt or caterpillar haul-off units for controlled pulling of extruded products. Contact width, speed range, clamping requirements, and centre height are selected for your product and line.
For a quote: Product dimensions, surface requirements, pulling speed, grip requirements, and line centre height.
Request Haul-Off Units QuoteComponent Selection
& Compatibility Review
For a new installation, replacement, or upgrade, confirm both the product requirements and the equipment interfaces. Final compatibility is reviewed before production.
Information to Confirm
Application & Material
Finished product, resin grade, and relevant processing requirements
Product Dimensions
Cross-section drawing, outer/inner diameter, wall thickness, and tolerances
Existing Equipment
Manufacturer, model, serial plate, and photos of the current installation
Mechanical Interfaces
Connection drawings, flange dimensions, mounting points, and line centre height
Sản lượng & Tốc độ dây chuyền
Target capacity and operating speed, matched to upstream and downstream equipment
Electrical & Controls
Voltage, frequency, phase, motor requirements, and control interfaces where applicable
Installation Space & Utilities
Available footprint, access, water supply/return, and other required services
Requirements by Component
Khuôn Đùn
Product cross-section, resin, layer structure, and die-to-extruder connection
Bộ phận Máy Đùn
Material, target output, screw requirements, and downstream compatibility
Bồn Nước Làm Mát
Cooling method, tank length, centre height, and water connections
Bộ phận Kéo
Product contact area, speed range, grip requirements, and centre height
Drawings & Installation Photos
Attach a drawing or clear photos showing the existing component, connection points, and machine nameplate. If drawings are unavailable, share key measurements for an initial review. Any additional information needed for final confirmation will be identified.
Discuss CompatibilityFrom Approved Specifications
to Confirmed Delivery
The production route, inspection scope, and acceptance criteria are confirmed for the component ordered. Dimensional, assembly, and functional checks are applied where relevant.
Specification & Interface Confirmation
Review drawings, materials, product dimensions, and installation interfaces. Confirm the configuration, inspection requirements, and acceptance criteria before production.
Drawings · Dimensions · Interfaces · Acceptance Criteria
Production & Assembly
Manufacturing, surface treatment, and assembly follow the approved component specifications. Treatment methods and assembly requirements depend on the part and application.
Machining · Applicable Treatment · Assembly
Component-Specific Inspection
Check die dimensions and connections, extruder assembly and applicable operation, tank dimensions and water circuits, or haul-off grip and speed as relevant. Trial conditions and inspection records are agreed for the order.
Dimensional Checks · Fit · Applicable Functional Tests
Confirmation, Packing & Delivery
Provide the agreed inspection information, photos, or trial results for review before dispatch. Confirm protective packing, shipping arrangements, and delivery documentation for the destination.
Review · Protective Packing · Shipping Documents
Component Installation Guidance &
Spare Parts Support
Installation guidance, operating support, and replacement parts are available according to the component and project requirements. Service scope, on-site arrangements, and any related charges are confirmed with your quotation.
Installation Guidance
Installation and connection guidance for the supplied component. Relevant drawings and remote commissioning support are confirmed for your order.
Operation & Maintenance
Operating, parameter-setting, and maintenance guidance appropriate to the component, with operator training arranged where required.
Technical Support
Remote assistance for installation questions, fault diagnosis, and operating adjustments. Photos, equipment details, and fault information help identify the issue.
Spare Parts Supply
Replacement screws, barrels, die parts, seals, belts, and other wear parts can be requested. Part specifications and compatibility are confirmed before supply.
Request an Extrusion
Line Component Quote
Select the component below and share your existing equipment model, product requirements, and key interface dimensions. Attach drawings or photos for a more useful compatibility review and quotation.
Details for Your Quote
-
Which component do you need, and is this a new installation, replacement, or upgrade?
-
Share the existing machine model, nameplate, and clear photos of the connection points.
-
Provide the material, product dimensions, target output, and relevant electrical requirements.
-
Attach a drawing or key measurements. We will identify any details needed to confirm compatibility.
© 2026 PLEXTRUD · Shenzhen, Guangdong, China · All rights reserved.
Liên hệ: plextrud@foxmail.com
English 
Español de México 
Português do Brasil 
Tiếng Việt